FLO-RITE-TEMP® STEAM/WATER HEATERS
Flo-Rite-Temp® Instantaneous Steam/Water Heater is a shell & tube heat exchanger fitted with an integral control valve for water heating and temperature control.
The feed forward design instantly determines downstream system demand and directs cold water through the heat exchanger. Water is heated above legionella survival temperatures with constant pressure steam and then blended with a proportional amount of cold water to set point temperature.
Flo-Rite-Temp Instantaneous Steam/Water Heaters are available with single wall or double wall heat exchangers in 4 standard sizes with a stainless steel option.
PRODUCT SPECIFICATIONS
| Model | Flow Capacity | Hot Water Outlet Connection Size |
| FRT535 | 35 gpm (132 lpm) | 1-1/2″ (38 mm) |
| FRT665 | 63 gpm (238 lpm) | 2″ (51 mm) |
| FRT8120 | 120 gpm (454 lpm) | 3″ (76 mm) |
| FRT535DW | 35 gpm (132 lpm) | 1-1/2″ (38 mm) |
| FRT665DW | 63 gpm (238 lpm) | 2″ (51 mm) |
| FRT8120DW | 120 gpm (454 lpm) | 3″ (76 mm) |
| FRT665SS | 37 gpm (140 lpm) | 2″ (51 mm) |
| FRT8120SS | 71 gpm (269 lpm) | 3″ (76 mm) |
| FRT442ST | 15 gpm (57 lpm) | 1-1/4″ (32 mm) |
| FRT552ST | 35 gpm (132 lpm) | 1-1/2″ (38 mm) |
| FRT662ST | 63 gpm (238 lpm) | 2″ (51 mm) |
| FRT882ST | 120 gpm (454 lpm) | 3″ (76 mm) |
RESOURCES
INSTALLATION AND MAINTENANCE
Flo-Rite-Temp® Radiant Heat or Closed Loop System Piping
Flo-Rite-Temp® Accumulation Piping System
Flo-Rite-Temp® Clean In Place Instructions
DATA SHEETS
Flo-Rite-Temp® FRT8120DW Data Sheet
CASE STUDIES
Optimized Thermal Utilities for Hospital Renovation (St. Louis Children’s Hospital) Case Study
Storage Heater Replacement for Shower Use (Shanghai Gaoyang International Tobacco) Case Study